Factors affecting the activity of anammox bacteria during start up in the continuous culture reactor.

Factors affecting cultivation of extremely slow-growing bacteria (anaerobic ammonium oxidiser, doubling time 11 days) were investigated by using upflow anaerobic sludge blanket (UASB) reactors which can maintain high solid retention time. The effects of concentrations of DO, free ammonia (FA), and nitrite on activation of anammox activity were tested during the start-up period. The reactor was inoculated with granular sludge collected from a full-scale UASB reactor used for treating brewery wastewater, and sludge from a piggery wastewater treatment plant and rotating biological contactor treating sewage. Results of continuous operation showed that concentrations of DO, free ammonia (FA) and nitrite in the reactors played a key role in stimulating the anammox activity during start-up period. It is crucial to keep DO below 0.2 ppm, FA below 2 mg/L and nitrite nitrogen below 35 mg/L to cultivate anammox cells in the continuous bioreactor. When the levels of DO, FA and nitrite in the influent were controlled at less than the inhibition levels, the anammox activity increased gradually in the anaerobic condition. Addition of hydrogen sulphide into the reactor enhanced anammox activity in the continuous culture. Through the SEM, TEM and FISH analysis, anammox bacteria were detected in the granular sludge after 3 months of continuous operation.     

BioFET sensor for detection of albumin in urine

Characterisation of a BioFET for detection of albumin in a mixture of human urine is presented. To avoid electrolyte effect of the urine, it was measured in PBS (phosphate buffer saline) at a fixed pH after albumin binding. The drain current was modulated by the albumin bound to the anti-albumin immobilised on the gate surface of the BioFET. The current variation ratio was likely to be proportional to the concentration of the albumin in the range 50-250 mg/1. The results show the feasibility of the BioFET as a urinary albumin sensor.     

An Inductively Coupled Lamb Wave Transducer

Wafer-type piezoelectric transducers are effective transducers for the excitation and detection of ultrasonic Lamb waves in plate-like structures. Such transducers are, however, vulnerable to corrosion and physical damage when mounted in exposed locations. In this paper we describe an inductively coupled Lamb wave transducer that eliminates the need for direct electrical connections. Signals are coupled into and out of the transducer using two probe coils. In this paper we explore the operation of inductively coupled transducers both analytically and experimentally. Finite-element analysis is used to determine inductances and the coupling constant, and electrical circuit analysis to determine the transfer function and its dependence on the gap between the probe coils and the transducer. Experiments show that return signals of millivolt amplitude are obtained when the transducer is excited with 10-V amplitude pulses. These transducers are suitable for permanent mounting on structures to be monitored for cracks or flaws     

Implementation of a vector quantization codebook design technique based on a competitive learning artificial neural network

We describe an implementation of a vector quantization codebook design algorithm based on the frequencysensitive competitive learning artificial neural network. The implementation, designed for use on high-performance computers, employs both multitasking and vectorization techniques. A C version of the algorithm tested on a CRAY Y-MP8/864 is discussed. We show how the implementation can be used to perform vector quantization, and demonstrate its use in compressing digital video image data. Two images are used, with various size codebooks, to test the performance of the implementation. The results show that the supercomputer techniques employed have significantly decreased the total execution time without affecting vector quantization performance.This work was supported by a Cray University Research Award and by NASA Lewis research grant number NAG3-1164.     

普通砂型铸造中球铁件冒口的CAD

根据球铁件凝固原理，对常用湿砂铸型中制造球铁件，用计算机完成控制压力冒口的设计，流程框图适于各工厂和车间之用。     

Localization of interferon-gamma and Ia-antigen in T cell line-mediated experimental autoimmune encephalomyelitis

This study reports the cellular localization of interferon-gamma (IFN-gamma) and MHC class II antigen (Ia) in the spinal cord of rats with experimental autoimmune encephalomyelitis induced by adoptive transfer of myelin basic protein-specific T cells. Numerous IFN-gamma-positive cells, stained with two different monoclonal antibodies against IFN-gamma, were present from days 3 to 7 after cell transfer. Their number was greatly reduced on day 10. A subpopulation of T cells was IFN-gamma positive. Moreover, a large number of ED1-positive macrophages contained IFN-gamma immunoreactivity. The transient presence of immune cells containing IFN-gamma immunoreactivity in experimental autoimmune encephalomyelitis suggests a pathogenic role of this cytokine in immune-mediated demyelination of the central nervous system.     

Prediction of evaporation heat transfer coefficient and pressure drop of refrigerant mixtures

A study on the prediction of heat transfer coefficient (HTC) and pressure drop of refrigerant mixtures is reported. HTCs and pressure drops of prospective mixtures to replace R12 and R22 are predicted on the same cooling capacity basis. Results indicate that nucleate boiling is suppressed at qualities greater than 20.0% for all mixtures and evaporation becomes the main heat transfer mechanism. For the same capacity, some mixtures containing R32 and R152a show 8.0–10.0% increase in HTCs. Some mixtures with large volatility difference exhibit as much as 55.0% reduction compared with R12 and R22, caused by mass transfer resistance and property degradation due to mixing (32.0%) and reduced mass flow rates (23.0%). Other mixtures with moderate volatility difference exhibit 20.0–30.0% degradation due mainly to reduced mass flow rates. The overall impact of heat transfer degradation, however, is insignificant if major heat transfer resistance exists in the heat transfer fluid side (air system). If the resistance in the heat transfer fluid side is of the same order of magnitude as that on the refrigerant side (water system), considerable reduction in overall HTC of up to 20% is expected. A study of the effect of uncertainties in transport properties on heat transfer shows that transport properties of liquid affect heat transfer more than other properties. Uncertainty of 10.0% in transport properties causes a change of less than 6% in heat transfer prediction.     

Taking the challenge of multiple access for third-generationcellular mobile radio systems-a European view

In Europe, the challenge of the design of third-generation cellular mobile radio systems has been taken numerous research and development activities in this field have been started. The authors try to give an overview of the European activities in this field. The article is organized in two parts. In the first part, the requirements for third-generation cellular mobile radio systems such as Universal Mobile Telecommunications System (UMTS) and Future Public Land Mobile Telecommunications System (FPLMTS), which has been named International Mobile Telecommunications after the year 2000 (IMT-2000) are presented concisely. Also, the importance and challenge of the multiple access design for such third-generation cellular mobile radio systems is explained. In the second part, numerous European research activities with focus on the multiple access design for third-generation cellular mobile radio systems are reviewed